Sceptre E195BD-SMQR Manuel d'utilisateur télécharger pdf (Page 23)

- 23 -

www.SCEPTRE.com

SCEPTRE E195 HDTV User Manual

Connecting to a PC with VGA and 3.5 mm minijack …

1. Make sure the power of HDTV and your PC is turned off.

2. Obtain a 15-pin D-Sub VGA cable; connect to the VGA output of your PC and the

other end to the VGA port on the back of your

HDTV.

3. Obtain a 3.5 mm Mini-jack, connect to the audio out of your PC and the other end

to the VGA Stereo Input port.

4. Turn on the power of the

HDTV and your PC.

5. Use the remote control’s source button or the source button on the TV to switch to

PC.

6. Change your PC resolution to 1366x768 at 60Hz refresh rate.

7. Press MENU to use the OSD’s PICTURE option.

8. Under the PICTURE option select PC Settings.

9. Under PC Settings use AUTO ADJUST to adjust the screen.

Please Note :

• For the best results, please set your PC resolution to 1366x768 at

60Hz. Please refer to the PC or graphic card’s manual for further

instructions on how to set your resolution and refresh rate.

• Please refer to your PC manual for video output requirements of the

video card.

• The VGA port of the TV features a power saving mode which will

automatically turn off the TV, if there’s no signal provided for more than

10 minutes.

1 2 ... 18 19 20 21 22 23 24 25 26 27 28 ... 64 65

Pas de commentaire

Sceptre E195BD-SMQR Manuel d'utilisateur Page 23